| | | | | | Robot-User Interfacing
While performing any robot operation, a user may interact with the
robot in various degrees ranging between two extremes: no interaction
and constant interaction. The two control modes associated with these
extremes are:
- Off-line programming: everything the robot is asked to do
is encoded in a program (in a suitable task description language) ,
downloaded to the robot controller and executed
- Teleoperation: the user (operator) drives the robot through
its tasks by means of suitable human-computer-interfaces
The first mode is suited for applications where the same operation is
repeated in a well-known non-changing environment, while the second
suits applications where variation of the operation and
unknown/unpredictable environment are present, hence requiring
continuous human judgement.
Interactive Autonomy In the course of various R&D activities the A&R section
has developed a mode called “Interactive Autonomy”
where the benefits of the above modes were combined to achieve maximum
flexibility of operation. This is achieved through the partitioning of
the robot work into two classes of sub-tasks: the ones that can be
carried out by the robot autonomously and the ones that require
interaction with the user.
The means for Robot-User Interaction Of course a user does not interface to the robot directly. The
interfacing goes through a chain of devices that on one side convert
human intelligible commands into robot commands and on the other side
convert robot feedback in human understandable information.
At the beginning of the chain (close to the user) there is a Robot
Control Station equipped with a series of Human-machine interfaces
(HMI), at the other end there is a robot controller.
According to the type of involvement of the user, different HMI are
needed:
- for programming activities the consolidated HMI of computer
consoles are adequate
- for advanced programming involving interaction with 3D
computer models, joysticks and space-mouse could be used
- for limited teleoperation, set of joysticks have been
traditionally used
- for advanced/immersive teleoperation with force feedback
master-arms and Exoskeletons are the clear choice
The A&R Section has been developing through a number of
R&D activities, Robot Controllers and Robot Control Stations to
make use of the Interactive Autonomy mode.
Since this mode allows to integrate seamlessly programming and
teleoperation modes, further activities have targeted the integration
of arm Exoskeletons into the developed Robot Control Stations
Last update: 25 September 2006 | |
| | |